News
|
|
05 May 2010
Viper Motorcycle Company, a wholly owned subsidiary of Viper Powersports Inc., announced today delivery of the first re-designed production short stroke engines for the 2011 Viper build.
09 February 2010
Ilmor announced today they have successfully run the first prototype Ilmor - Viper Motorcycle Company engine on the dyno ahead of schedule and are already seeing promising results.
07 October 2009
Ilmor Engineering is pleased to announce that its presence at the Professional Motorsport World (PMW) Expo in Cologne, Germany from 3rd-5th November
26 August 2009
Ilmor Engineering Ltd has achieved ISO 9001:2008 certification through TUV UK, demonstrating our longstanding commitment to the quality of Ilmor’s products and customer satisfaction
12 August 2009
With its first prototype Five-Stroke having achieved an impressive fuel consumption figure of 226g/kWh, engine designer and manufacturer Ilmor Engineering is planning a second phase development engine...
|
|
|
|
|
|
| Ilmor dynos for hire |
06 January 09 |
The Ilmor dynamometer facilities are used for more than just testing our own racing engines. Dyno cells can be hired out so that clients can test their own engines, from OEM's to racing teams right through to club racing competitors.
- 6 water brake dynos and 1 full transient electric dyno
- Power operating range: 10 - 1000bhp
- Torque capacity: Up to 1200Nm
- Speed range: Up to 20000rpm
- Emissions testing with Horiba MEXA 7170D gas analyser
- CO CO2 THC CH4 NO/NOx O2 feedgas/tailpipe analysis
- AVL 415 smoke-meter (optimisation of DISI and CI combustion)
- Sampling through dual heated lines
- Control/measurement logging integrated into the testbed
- Fully conditioned combustion air handling system
- Air inlet temperature control
- Air inlet pressure control
- Humidity control
- Dyno control bench facilities
- Automatic test and data logging (AVL)
- Clean, spacious environment
- Telephone and dedicated PC with internet access
Ilmor can provide design support to carry out the initial engine installation work to ensure that testing can commence as soon as possible. Clients can choose to use the Ilmor dynos to carry out their own development testing, or take advantage of Ilmor's extensive experience in engine development. Our development engineers will be able to compile and supervise development test programmes for your engine and make recommendations based on your requirements.
More information about our dyno facilities and other test rigs can be found here.
|
|
|
|
