News
|
|
15 June 2013
Chevrolet IndyCar V6 Drivers Sweep Top-Five Finishing Positions on Famed One-Mile Oval
08 June 2013
Helio Castroneves made a statement tonight at Texas Motor Speedway. The No. 3 AAA Insurance Team Penske Chevrolet IndyCar V6 driver took the lead on lap 97, and never looked back
26 May 2013
Tony Kanaan, No. 11 Hydroxycut KV Racing Technology SH Racing Chevrolet, had been denied a trip to victory lane many times at Indianapolis Motor Speedway (IMS), but as fate would have it this year, he was in the right place at the right time to capture his first Indianapolis 500 win.
18 May 2013
Ed Carpenter fulfilled a life-long dream today by winning the pole for the Indianapolis 500. In his own Ed Carpenter Racing No. 20 Fuzzy’s Ultra Premium Vodka Chevrolet V6, Carpenter put up a blistering four-lap average speed of 228.762 mph
|
|
|
ENGINE TESTING - accuracy is key
|
|
DATA ACQUISITION
TRANSIENT
DYNO HIRE
EMISSIONS
|
|
|
|
|
|
Coupled with our extensive development experience, we have worked hard at providing ourselves with some of the most accurate engine testing facilities in the world, a vital part of measuring fine performance differences on engines which are already at the top of their capabilities. Air inlet temperature, pressure and humidity are controlled by a combustion air handling system ensuring that test results are accurate and repeatable.
Our dynamometer facilities can be hired out so that clients may test their own engines. Ilmor can provide design support to carry out the initial engine installation work and will provide as much or little engineering support as is required to support the testing and ensure the client achieves their desired objectives.
|
Dyno and test rig facilities available for clients
|
To develop the best engines you need the best facilities. Whether it's racing engine performance or production engine emissions Ilmor has the kit.
- 1 transient dyno for higher speeds
- Valvegear test rig and air-flow bench
- Crankcase windage simulation rig
|
|
Emissions measurement
The Ilmor dynos are now equipped with a Horiba Emissions Measurement system.
- Horiba MEXA 7170D emissions kit
- CO CO2 THC CH4 NO/NOx O2 feedgas/tailpipe analysis
|
|
Testing and developing your engine
Clients can choose to use the Ilmor dynos to carry out their own development testing, or take advantage of Ilmor's extensive experience in engine development. Our development engineers will be able to compile and supervise development test programmes for your engine and make recommendations based on your requirements.
Download list of Ilmor Dyno Hardware
|
|
|
|